Ford Transit 2014+ Brake Light Reverse Camera Kit with 7" Mirror Monitor | PM39BLC
Our 7" rear view mirror monitor + brake light reversing camera kit to fit the 2014 onwards Ford Transit vans.
Ford Transit Twin Brake Light Reverse Camera Kit with 7" Mirror Monitor
If you are looking for a retrofit factory look reversing camera for your Ford Transit van, then look no further. Our version comes from our most respected brake light camera supplier, and is based on their winning lens/image sensor combo - the PC4089 image sensor and quality all glass composite lens (unlike the commonly found cheaper plastic/glass versions that fade over time with UV from the sun causing a gradually worsening picture).
This twin brake light reversing camera kit fits :
- Ford Transit Mk8 Jumbo Vans - 2014 - Present - the large "Jumbo" vans built after 2014. This brake light fits all models including later facelift versions with an added black trim around the light.
- Ford Transit Custom Tailgate - 2014 - Present - the lift up tailgate version (not the small 2 door custom).
- Ford Tourneo Custom - 2014 - Present - these vans uses the same long piece high level brake light as the large Transit vans use.
Rear View Mirror Monitor Display:
- 7" display for clear viewing.
- A good quality 800x480 digital high resolution display with excellent colour replication.
- Adjustable guidelines can be added/removed to the image to assist with parking. To use this function you will need to connect the green trigger wire to the reverse light feed (see PDF instructions tab for more info selecting the monitor you wish to choose ie clip-over or windscreen bracket mount).
- This brake light reversing camera kit is supplied with screw locking aviation connectors on the cabling. We prefer this setup because it means a monitor can provide power to the camera, and this avoids CANBUS issues that can occur if taking power from the reverse light. This also makes fitting easier (you can even run the whole system off a lighter plug!).
Choose your preferred mirror monitor mounting option :
- Have a mirror? Choose our clip-over mirror option, we will supply you with a rear view mirror monitor that clips over your existing interior mirror.
- Don't have a mirror but have a metal button on the windscreen for one? Choose our ACCMB2 swan neck bracket option, we will supply you with our swan neck bracket compatible rear view mirror monitor + a swan neck bracket to fit to the Ford windscreen buttons commonly found on most Ford Transit vans.
- Don't have a mirror and don't have a metal button on the windscreen? Choose our ACCMB2 + Button + Glue option, we will supply you with the bracket compatible monitor, a Ford Button to bond to the windscreen, Loctite 319 windscreen button adhesive to bond the button up, as well as full instructions on how to mount a windscreen button with Loctite 319 adhesive. We have researched videos, reviews, and manufacturer recommendations to provide the best instructions available to get the job done correct, first time.
Twin Lens Brake Light Reversing + Rear View Camera:
- Comes with our popular twin lens brake light, fitted with a wide angle downward facing camera for reversing, and a slightly more narrow angle camera for rear view. Both adjustable.
- Reversing camera has an external lens to allow for a wider angle view for parking, plus IR LED's to light up the area under neath the camera to allow the camera to see in the dark (the light isn't visible to human eyes, just the camera).
- Both reverse view and rear view cameras are fitted with our favourite CMOS sensor - the premium high resolution 700TVL PC4089. Both cameras use quality all glass composite lenses (avoids fade over time unlike the more common 2xglass,2xplastic lenses).
Guarantee and Support:
- Comes with a 2-year guarantee.
- Offers lifetime support from UK specialists.
Installation and Power Options:
- Easy installation with various power options.
- Single power connection powers the entire system.
- Standard hardwiring ALWAYS included even when adding the additional connectors.
- See our Fuse Taps / Piggyback Fuse Holders Category for the latest and easiest way of wiring your system in to your vehicles fuse box. We even have a selection with a 2M cable to reach the fuse box of your choice. This is fitted with an Earth/Ground terminal on the black wire, which can be pulled/separated away from the red wire if desired to run elsewhere to a chassis screw or bolt.
Mainland UK
We have three postage options to select from during checkout (on larger items eg kits there will be two options):
Royal Mail Tracked - Smaller / Lighter weight orders. This will be sent via Royal Mails Tracked Service. They will send emails/SMS to inform you of the tracking events. This option won't be shown for heavier weight orders.
DPD 2 Day. Small or large orders. This will be sent with DPD Local and should arrive within two working days (if you place the order before 12:30PM).
DPD Next Day. Small or large orders. This will be sent with DPD Local and should arrive the following working day (if you place the order before 12:30PM).
Highlands and Islands UK
We offer a 2-3 day service fulfilled with either Royal Mail Post, or Parcel Force. The prices charged are identical to mainland UK. Small orders will be sent via the post, larger orders via Parcel Force.
Outside of the UK
We shop around when selecting the best method for Europe (we avoid the cheap budget couriers due to parcels being lost). Southern Ireland is always sent via DPD. Other countries will usually be either Parcel Force, UPS, or Fedex. Please note that we require a phone number for international deliveries. Also if you are a company in Europe, a VAT number or EORI number will help speed up customs.
We remove the UK VAT (Tax) when any country other than the UK is selected in the shopping basket or checkout. From this point all prices on the site drop down to exclude VAT. If you are from the Channel Islands, please select Jersey / Guernsey from the country list in order to remove UK sales Tax.
60 day "Change of Mind" policy
We understand that for whatever reason you may need to return your purchase. We provide a 60 day opportunity for you to do just that. Simply give us an email or a phone call to let us know it is due back. You are responsible for the shipping back to us but you will receive a full refund including the original shipping we charged you for your order. We recommend getting a signed for or proof of postage when posting back to us.
All we ask is that you return the items in the condition they were sent in, with the packaging present. You are welcome to have temporarily tested the product and unravelled things, but if you have cut wires, soldered, glued, installed and used for a while then this wouldn't be suitable for returns under the change of mind policy.