PM39BLB: Brake Light Reversing Camera Kit with 7" Hi-Res Mirror Monitor for Ducato/Relay/Boxer (2006-Present), and Vauxhall Movano (2022+)
Our 7" rear view mirror monitor + brake light reversing camera kit to fit the 2006 onwards Fiat Ducato, Citroen Relay, and Peugeot Boxer vans, as well as 2022 onwards Vauxhall Movano vans.
Introduction to our Fiat Ducato, Peugeot Boxer, Citroen Relay 2006 - Present, and Vauxhall Movano 2022+ Brake Light Reversing Camera Kit with 7" Mirror Monitor
- This listing is for our brake light reversing camera kit with mirror monitor to fit the Citroen Relay, Fiat Ducato, and Peugeot Boxer vans built after 2006. Now also fits 2022+ Vauxhall Movano vans.
- This version fixes with the original 2 screws fitted to your original brake light.
- 7 inch high resolution mirror monitor - choice of 2 types : clip over existing mirror version, or swan neck bracket to fit to existing windscreen "button" version.
- This brake light reversing camera kit is supplied with 4-pin aviation connectors on all the cabling. We prefer the 4-pin version because it means the monitor can provide power to the camera, and this avoids CANBUS issues that can occur if taking power from the reverse light. The monitor we use provides power down an all-in-one screw together cable making fitting easy.
- We use a high res image sensor, namely the 1/3" PC4089 700TVL sensor. Coupled with a 2.6mm 4 layer glass lens (some cheaper cameras use 2xglass 2xplastic which eventually turn cloudy due to sun exposure) to give approximately 130° diagonal field of view.
- The camera has some up/down adjustability, however it can't be angled high enough to give a view back down the road.
- You will remove the light strip from your original brake light and transplant it to the new brake light reversing camera. Please see the video below, or the image to show how this is done. It just involves pressing in a few tabs top and bottom of the old brake light.
Our YouTube video about the brake light reversing camera kit supplied
Mirror Mount Options
Please see our Mirror Mount Options tab on this listing for details to assist your selection. We stock versions that clip over your existing interior mirror, or fit directly to existing metal fitments on the windscreen.
Quality Image Sensor and Lens
- We use a premium modern 700TVL CMOS sensor to capture the image, coupled with a very high quality 4x glass layer composite lens. All glass lenses avoid the fading experienced with the cheaper 2x plastic, 2x glass lenses common on cheaper reversing cameras.
- This brake light reversing camera has the lens fitted externally, which means you get a wider field of view when compared to models that have the lens mounted behind a glass cover.
Guarantee and Support:
- Comes with a 2-year guarantee.
- Offers lifetime support from UK specialists.
Installation and Power Options:
- Easy installation with various power options.
- Single power connection powers the entire system.
- Standard hardwiring ALWAYS included even when adding the additional connectors.
- See our Fuse Taps / Piggyback Fuse Holders Category for the latest and easiest way of wiring your system in to your vehicles fuse box. We even have a selection with a 2M cable to reach the fuse box of your choice. This is fitted with an Earth/Ground terminal on the black wire, which can be pulled/separated away from the red wire if desired to run elsewhere to a chassis screw or bolt.
Clip over existing rear view mirror monitor
This is the default option. This option allows you to clip-over the existing interior mirror in the van with strong spring loaded clamps.
ACCMB2 + MP35 (Mostly Later Vans) Upgrade
This is a new option for 2023. It allows you to use a more adjustable bracket, with a mounting plate that attaches to the existing windscreen stub of the later vans. This option makes fitting a little easier, when compared to the standard twist on mirrors. This option turns your windscreen stub in to the Ford type, which is a simple slide down variety.
ACCMB7 (Mostly Earlier Vans)
We usually see this type of V shape metal windscreen buttons on earlier build vans. Having said that we have seen this installed even on vans as late as 2019.
ACCMB2 + Button + Glue (Any van without an OEM metal button)
We have had quite a few instances where the vehicle doesn't have any windscreen button fitted to mount one of our swan neck brackets. In these situations we can supply a kit that allows you to bond a metal piece to the windscreen - actually it is a Ford button. We supply the metal button + Loctite 319 (button mount adhesive) + bracket + instructions.
Monitor
7” Diagonally Measured Colour LCD screen
Power supply: 12V/24V
Power Consumption: 7.5W Max
Digital Screen Resolution: 800 x3(RGB)x480
2x 4 pin Inputs
PAL/NTSC/AUTO
Camera
Sensor: 1/3" PC4089 CMOS
Effective Pixels: 976(H) x 592(V)
TV line: 700 TVL
Lens: 1.9mm
Min illumination: 0.0 LUX (IR LED on)
IR LEDs: 8 pcs
Night vision: 10m
Waterproof: IP68
View angle: V 85 degrees, H 130 degrees D 160 degrees
Camera lens adjustment: 20 degrees up and down
Voltage: 12 volts
Current consumption: 150mA
Operating temperature: -20 to 70 degrees C
Guideline: Optional (some have a trigger wire to select)
Certificates: FCC, CE, E-mark, RoHS
Connector: 4 pin aviation
Mainland UK
We have three postage options to select from during checkout (on larger items eg kits there will be two options):
Royal Mail Tracked - Smaller / Lighter weight orders. This will be sent via Royal Mails Tracked Service. They will send emails/SMS to inform you of the tracking events. This option won't be shown for heavier weight orders.
DPD 2 Day. Small or large orders. This will be sent with DPD Local and should arrive within two working days (if you place the order before 12:30PM).
DPD Next Day. Small or large orders. This will be sent with DPD Local and should arrive the following working day (if you place the order before 12:30PM).
Highlands and Islands UK
We offer a 2-3 day service fulfilled with either Royal Mail Post, or Parcel Force. The prices charged are identical to mainland UK. Small orders will be sent via the post, larger orders via Parcel Force.
Outside of the UK
We shop around when selecting the best method for Europe (we avoid the cheap budget couriers due to parcels being lost). Southern Ireland is always sent via DPD. Other countries will usually be either Parcel Force, UPS, or Fedex. Please note that we require a phone number for international deliveries. Also if you are a company in Europe, a VAT number or EORI number will help speed up customs.
We remove the UK VAT (Tax) when any country other than the UK is selected in the shopping basket or checkout. From this point all prices on the site drop down to exclude VAT. If you are from the Channel Islands, please select Jersey / Guernsey from the country list in order to remove UK sales Tax.
60 day "Change of Mind" policy
We understand that for whatever reason you may need to return your purchase. We provide a 60 day opportunity for you to do just that. Simply give us an email or a phone call to let us know it is due back. You are responsible for the shipping back to us but you will receive a full refund including the original shipping we charged you for your order. We recommend getting a signed for or proof of postage when posting back to us.
All we ask is that you return the items in the condition they were sent in, with the packaging present. You are welcome to have temporarily tested the product and unravelled things, but if you have cut wires, soldered, glued, installed and used for a while then this wouldn't be suitable for returns under the change of mind policy.